The Winix 115115 filter can be used as replacement for Winix Plasmawave 5300 filter and is compatible also with Winix air cleaner models 6300, P300, 5300, 5300-2, 6300-2, and C535.
Winix 115115 filter comes with True HEPA + 4 filter activated Carbon Replacement filters included which help to get rid air of dust, allergens and other particles.
Use it to replace worn out filters.
Winix Plasmawave 5300 Filter
Recommended replacement schedule of carbon pre-filter is once every 3 months.
Replace HEPA filter when the indicator light turns on. Under normal use the HEPA filter should last 12 months depending on air quality.
The replacement filter indicator will signal when to replace/clean the HEPA Filter.
The clean/replacement period will vary depending on the hours of usage, air quality and location of the unit.
There are two separate filters: Washable HEPA and Carbon Pre Filter in Winix 5300 Plasmawave purifier.
NOTE: Do not wash and reuse Carbon Filter as it will not work effectively. The Washable HEPA filter should normally be washed every 1/2 year but maximum 6 times equivalent to 3 years of usage.
Then it should be replaced. After changing/cleaning HEPA, mark the filter at designated check boxes on filter edge, and push reset button on inside of unit.
Winix 115115 Filter Replacement
Replacing your Winix 5300 filter is easier than ever with this quick instructional video courtesy of Crucial Air.
Winix Plasmawave 5300 Filter Replacement
Here is how replacement procedure should go when replacing filter for Winix 5300:
1.Remove the front panel by grasping the bottom outside edges and pulling gently toward you.
2. Pull the filters to be changed.
3. Remove any packaging wrap around filters.
4. Place the new filters in the main unit. HEPA filter should always be placed first then carbon filter.
5. Reset filter using filter reset button on display panel.
6. Turn on the unit.